Motorcycle Jack Lift 1100 lb | Scissor Lift Center Stand with Crank, 3.7–15.7 in Height

X-Frame Screw Drive Layout

This center-lift uses a steel scissor X-frame with a threaded lead screw to convert hand-crank rotation into vertical travel. Load rating is 1100 lb (499 kg).

Three configurations are available: wide flat deck (no casters), wide deck on a dolly base with casters and tool tray, or a dual-saddle top for curved contact areas.

Hand-Crank Lift and Variant Features

A removable handle turns the lead screw to raise or lower the platform within each variant’s stated lift range. The saddle variant includes a 6-position locking pin for height indexing after adjustment. The dolly variant uses four casters for shop-floor repositioning and includes a base-mounted tool tray.

Placement, Storage, and Basic Care

Set the jack on a level surface and align the deck or saddles under the motorcycle’s center-lift contact points used for service access. Turn the crank to the target height, then install the locking pin where included.

For storage, fold the scissor frame to its lowest height and wipe painted surfaces with a shop towel to remove residue.

Product Benefits:

• Manual Screw Drive: Hand crank turns a threaded lead screw to raise or lower the deck or saddles.
• 1100 lb Load Rating: Rated capacity is 1100 lb (499 kg) across all configurations.
• Three Top Configurations: Available as a wide flat deck, a wide deck on a caster base with tool tray, or a dual-saddle top for curved contact areas.
• Fold-Down Storage: Scissor X-frame folds to the lowest height for storage under a bench or on a shelf.
• Locking Pin Indexing: Saddle configuration includes a 6-position locking pin for height indexing after adjustment.

Specification:

• Material:
  Without Caster= Alloy steel
  With Caster= Alloy steel
  With Saddle= High carbon steel
• Load Capacity: All Variants 1100 lb
• Lift Range (Min–Max): Without Caster= 3.7–13.8 in
  With Caster= 4.7–15.4 in
  With Saddle= 3.7–15.7 in