Car Jump Starter 1500A | 12V Lithium Portable Jump Box for Up to 6.0L Gas & 3.0L Diesel Engines

See the Voltage First

This compact 12V jump starter uses a 37Wh lithium NMC battery pack with a specified 1500A peak output. The included jumper cable uses metal clamp jaws for direct contact on top-post battery terminals. An internal voltage-sensing routine identifies battery voltage below 9V and enables a manual boost activation sequence.

Voltage Readout, Then Crank Procedure

Connect the jumper cable to the unit, then attach clamps to the battery terminals with correct polarity. The status indicator reflects detected battery voltage, including a low-voltage condition under 9V.

When applicable, the boost control can be used for low-voltage 12V batteries. The built-in LED work light includes three modes: steady, strobe, and signal/SOS.

Connect then Start

Store the unit in a door pocket, or trunk-side storage area. Keep clamp jaws clean and dry, and route the cable away from belts, pulleys, fans, and hot engine parts during use.

For storage, remove the clamps from the battery first, disconnect the jumper cable from the unit, then coil the lead to reduce connector strain.

Product Benefits:

• 12V System Compatibility: Designed for standard 12V vehicle electrical systems.
• Compact Storage Size: 7.5 × 4.5 × 3.7 in for door pockets or trunk-side storage areas.
• Direct Battery Connection: Metal clamp jaws attach to top-post battery terminals.
• Low-Voltage Detection and Boost Control: Detects under 9V and enables manual boost activation for low-voltage 12V batteries.
• LED Work Light Modes: LED light includes steady, strobe, and signal/SOS modes.

Specification:

• Material: Metal clamp jaws; Polymer housing
• Weight: 1.76 lb
• Power Source: Internal lithium battery pack
• Output Compatibility: 12V vehicle electrical systems
• Capacity & Output: 37Wh; 1500A peak; manual boost below 9V
• Connection Type: Jumper cable with clamps; LED work light (3 modes)